AudioOutput <html>The audio playback device %1 does not work. Falling back to %2.</html> <html>Switching to the audio playback device %1 which just became available and has higher preference.</html> Revert back to device '%1' CloseButton Close Tab أغلق اللسان PPDOptionsModel Name الإسم Phonon:: Notifications تنبيهات Music موسيقى Video فديو Communication اتصالات Games ألعاب Accessibility إتاحة Phonon::Gstreamer::Backend Warning: You do not seem to have the package gstreamer0.10-plugins-good installed. Some video features have been disabled. Warning: You do not seem to have the base GStreamer plugins installed. All audio and video support has been disabled Phonon::Gstreamer::MediaObject Cannot start playback. Check your Gstreamer installation and make sure you have libgstreamer-plugins-base installed. A required codec is missing. You need to install the following codec(s) to play this content: %0 Could not open media source. Invalid source type. Could not locate media source. Could not open audio device. The device is already in use. Could not decode media source. Phonon::VolumeSlider Volume: %1% الشدة: %1% Use this slider to adjust the volume. The leftmost position is 0%, the rightmost is %1% استخدم هذا المنزلق لضبط شدة الصوت. القيمة أقصى اليسار 0% والقيمة أقصى اليمين %1% Q3Accel %1, %2 not defined %1، %2 غير مُعرّف Ambiguous %1 not handled %1 المُلتبس لم يُعالج Q3DataTable True صحيح False خاطئ Insert أدرِج Update حدّث Delete احذف Q3FileDialog Copy or Move a File انسخ أو انقل ملفّ Read: %1 قرأ: %1 Write: %1 كتب: %1 Cancel ألغِ All Files (*) كل الملفّات (*) Name الاسم Size الحجم Type النوع Date التّاريخ Attributes الخواص &OK &حسنا Look &in: ابحث &في: File &name: ا&سم الملفّ: File &type: &نوع الملفّ: Back للخلف One directory up دليل للأعلى Create New Folder أنشئ مجلدا جديدا List View منظور القائمة Detail View منظور تفصيلي Preview File Info اعرض معاينة لمعلومات الملفّ Preview File Contents اعرض معاينة لمحتويات الملفّ Read-write قراءة\كتابة Read-only قراءة فقط Write-only كتابة فقط Inaccessible غير متاح Symlink to File وصلة رمزية لملفّ Symlink to Directory وصلة رمزية لدليل Symlink to Special وصلة رمزية لملفّ خاصّ File ملفّ Dir دليل Special ملفّ خاصّ Open افتح Save As احفظ باسم &Open ا&فتح &Save ا&حفظ &Rename &غيّر الاسم &Delete اح&ذف R&eload أ&عد التّحميل Sort by &Name رتب بالا&سم Sort by &Size رتب بال&حجم Sort by &Date رتب بالتّا&ريخ &Unsorted غير &مرتب Sort رتّب Show &hidden files اع&رض الملفّات المخفية the file الملفّ the directory الدّليل the symlink الوصلة الرّمزية Delete %1 احذف %1 <qt>Are you sure you wish to delete %1 "%2"?</qt> <qt>هل تريد حقا حذف %1 "%2"؟</qt> &Yes &نعم &No &لا New Folder 1 مجلد جديد 1 New Folder مجلد جديد New Folder %1 مجلد جديد %1 Find Directory ابحث عن دليل Directories أدلّة Directory: دليل: Error خطأ %1 File not found. Check path and filename. %1 لم يُعثر على الملفّ. تحقّق من المسار و اسم الملفّ. All Files (*.*) كل الملفّات (*.*) Open افتح Select a Directory اختر دليلا Q3LocalFs Could not read directory %1 تعذّر قراءة الدّليل %1 Could not create directory %1 تعذّر إنشاء الدّليل %1 Could not remove file or directory %1 تعذّر إزالة الملفّ أو الدّليل %1 Could not rename %1 to %2 تعذّر تغيير اسم %1 إلى %2 Could not open %1 تعذّر فتح %1 Could not write %1 تعذّر كتابة %1 Q3MainWindow Line up صُفّ Customize... خصّص... Q3NetworkProtocol Operation stopped by the user أوقف المُستخدم العمليّة Q3ProgressDialog Cancel ألغِ Q3TabDialog OK حسنا Apply طبّق Help مساعدة Defaults المبدئيات Cancel ألغِ Q3TextEdit &Undo &تراجع &Redo أ&عد Cu&t &قص &Copy ا&نسخ &Paste ا&لصق Clear امحُ Select All اختر الكل Q3TitleBar System النظام Restore up استعد لأعلى Minimize صغّر Restore down استعد لأسفل Maximize كبّر Close أغلق Contains commands to manipulate the window يحتوي أوامر التعامل مع النافذة Puts a minimized back to normal يعيد النافذة المصغرة إلى الوضع الطبيعي Moves the window out of the way يزيح النافذة من الطريق Puts a maximized window back to normal يعيد النافذة المكبرة إلى الوضع الطبيعي Makes the window full screen يجعل النافذة تملأ الشاشة Closes the window يغلق النافذة Displays the name of the window and contains controls to manipulate it يعرض اسم النافذة ويحتوي تحمات للتعامل معها Q3ToolBar More... أكثر... Q3UrlOperator The protocol `%1' is not supported البروتوكول '%1' غير مدعوم The protocol `%1' does not support listing directories البروتوكول '%1' لا يدعم سرد الأدلة The protocol `%1' does not support creating new directories البروتوكول '%1' لا يدعم إنشاء أدلة جديدة The protocol `%1' does not support removing files or directories البروتوكول '%1' لا يدعم إزالة الملفات أو الأدلة The protocol `%1' does not support renaming files or directories البروتوكول '%1' لا يدعم تغيير أسماء الملفات أو الأدلة The protocol `%1' does not support getting files البروتوكول '%1' لا يدعم جلب الملفات The protocol `%1' does not support putting files البروتوكول '%1' لا يدعم وضع الملفات The protocol `%1' does not support copying or moving files or directories البروتوكول '%1' لا يدعم نسخ أو نقل الملفات أو الأدلة (unknown) (مجهول) Q3Wizard &Cancel أ&لغِ < &Back < لل&خلف &Next > ال&تّالي > &Finish أ&نهِ &Help &مساعدة QAbstractSocket Host not found لم يُعثر على المستضيف Connection refused رفض الاتصال Connection timed out انتهت مهلة الاتصال Operation on socket is not supported العملية على المقبس غير مدعومة Socket operation timed out انتهت مهلة عملية المقبس Socket is not connected المقبس غير متصّل Network unreachable تعذّر الوصول للشبكة QAbstractSpinBox &Step up خطوة لأ&على Step &down خطوة لأ&سفل &Select All اختر ال&كل QApplication QT_LAYOUT_DIRECTION Translate this string to the string 'LTR' in left-to-right languages or to 'RTL' in right-to-left languages (such as Hebrew and Arabic) to get proper widget layout. RTL Executable '%1' requires Qt %2, found Qt %3. البرنامج '%1' يتطلّب Qt %2، Qt %3 الموجودة. Incompatible Qt Library Error خطأ: مكتبة Qt غير موافقة Activate نشّط Activates the program's main window نشّط نافذة البرنامج الرئيسية QAxSelect Select ActiveX Control اختر تحكم أكتِف إكس OK حسنا &Cancel أ&لغِ COM &Object: &كائن COM: QCheckBox Uncheck ارفع التأشير Check أشّر Toggle بدّل QColorDialog Hu&e: ال&صّبغة: &Sat: التّ&شبّع: &Val: ال&قيمة: &Red: أ&حمر: &Green: أ&خضر: Bl&ue: أ&زرق: A&lpha channel: قناة أ&لفا: Select Color اختر لونا &Basic colors الألوان الأ&ساسية &Custom colors أل&وان مخصّصة &Define Custom Colors >> تع&ريف الألوان المخصّصة >> OK موافقة Cancel إلغاء &Add to Custom Colors الإ&ضافة إلى الألوان المخصّصة Select color إنتقاء اللّون QComboBox Open افتح False خاطئ True صحيح Close أغلق QCoreApplication %1: key is empty QSystemSemaphore %1: unable to make key QSystemSemaphore %1: ftok failed QSystemSemaphore QDB2Driver Unable to connect Unable to commit transaction Unable to rollback transaction Unable to set autocommit QDB2Result Unable to execute statement Unable to prepare statement Unable to bind variable Unable to fetch record %1 Unable to fetch next Unable to fetch first QDateTimeEdit AM ص am ص PM م pm م QDial QDial SpeedoMeter SliderHandle QDialog What's This? ما هذا؟ Done تم QDialogButtonBox OK حسنا Save احفظ &Save ا&حفظ Open افتح Cancel ألغِ &Cancel أ&لغِ Close أغلق &Close أ&غلق Apply طبّق Reset صفّر Help مساعدة Don't Save لا تحفظ Discard تجاهل &Yes &نعم Yes to &All نعم لل&كل &No &لا N&o to All لا &للكل Save All احفظ الكل Abort أوقف Retry أعِد المحاولة Ignore تجاهل Restore Defaults استعد المبدئيات Close without Saving أغلق دون حفظ &OK &حسنا QDirModel Name الاسم Size الحجم Kind Match OS X Finder النوع Type All other platforms النوع Date Modified تاريخ التعديل QDockWidget Close أغلق Dock أرسِ Float أطفِ QDoubleSpinBox More أكثر Less أقل QErrorMessage &Show this message again ا&عرض هذه الرسالة مجدّدا &OK &حسنا Debug Message: رسالة التنقيح: Warning: تحذير: Fatal Error: خطأ قاتل: QFile Destination file exists الملف الهدف موجود مسبقا Cannot remove source file تعذّر حذف الملف المصدر Cannot open %1 for input تعذّر فتح %1 للقراءة منه Cannot open for output تعذّر فتحه للكتابة Failure to write block فشلت كتابة الوحدة Cannot create %1 for output تعذّر إنشاء %1 للكتابة به QFileDialog All Files (*) كل الملفّات (*) Back للخلف List View منظور القائمة Detail View منظور مفصّل File ملفّ Open افتح Save As احفظ باسم &Open ا&فتح &Save ا&حفظ Recent Places الأماكن الحديثة &Rename &غيّر الاسم &Delete اح&ذف Show &hidden files اع&رض الملفّات المخفية New Folder مجلد جديد Find Directory ابحث عن مجلد Directories المجلدات All Files (*.*) كل الملفّات (*.*) Directory: مجلد: %1 already exists. Do you want to replace it? %1 موجود مسبقا. أتريد استبداله؟ %1 File not found. Please verify the correct file name was given. %1 لم يُعثر على الملف. من فضلك تأكد أنك أدخلت الاسم الصحيح. My Computer حاسوبي Parent Directory الدليل الأم Files of type: الملفات من نوع: %1 Directory not found. Please verify the correct directory name was given. %1 لم يُعثر على الدايا. من فضلك تأكد أنك أدخلت الاسم الصحيح. '%1' is write protected. Do you want to delete it anyway? '%1' محمي ضد الكتابة. أتريد حذفه مع هذا؟ Are sure you want to delete '%1'? أمتأكد أنك تريد حذف '%1'؟ Could not delete directory. تعذّر حذف المجلد. Drive سواقة Unknown مجهول Show أظهر Forward للأمام &New Folder &مجلد جديد &Choose ا&ختر Remove أزِل File &name: ا&سم الملفّ: Look in: ابحث في: Create New Folder أنشئ مجلدا جديدا QFileSystemModel %1 TB %1 ت.بايت %1 GB %1 ج.بايت %1 MB %1 م.بايت %1 KB %1 ك.بايت %1 bytes %1 بايت Invalid filename اسم ملف غير صالح The name "%1" can not be used.Try using another name, with fewer characters or no punctuations marks. لا يمكن استخدام الاسم "%1".جرب اسما آخر يحتوي حروفا أقل أو بدون علامات ترقيم. Name الاسم Size الحجم Kind Match OS X Finder النوع Type All other platforms النوع Date Modified تاريخ التعديل My Computer حاسوبي Computer الحاسوب QFontDatabase Normal عادي Bold عريض Demi Bold نصف عريض Black داكن Demi متوسط Light فاتح Italic إيطالي Oblique مائل Any أي Latin لاتيني Greek يوناني Cyrillic سريلي Armenian أرميني Hebrew عبري Arabic عربي Syriac سرياني Thaana تانا Devanagari دفنيجري Bengali بنغالي Gurmukhi جروموخي Gujarati كوجراتي Oriya أوريا Tamil تاميلي Telugu تلوجو Kannada كنادا Malayalam مالايالم Sinhala سنهالا Thai تايلاندي Lao لاو Tibetan تبتي Myanmar ماينمار Georgian جورجي Khmer خميري Simplified Chinese صيني مبسط Traditional Chinese صيني تقليدي Japanese ياباني Korean كوري Vietnamese فيتنامي Symbol رموز Ogham أوجهام Runic مسماري QFontDialog &Font ال&خطّ Font st&yle &طراز الخطّ &Size ال&حجم Effects المؤثرات Stri&keout &شطب &Underline ت&سطير Sample عيّنة Select Font اختر خطّا Wr&iting System &نظام الكتابة QFtp Host %1 found وُجِد المستضيف %1 Host found وُجِد المستضيف Connected to host %1 اتصل بالمستضيف %1 Connected to host اتصل بالمستضيف Connection to %1 closed أُغلق الاتصال بالمستضيف %1 Connection closed أُغلق الاتصال Host %1 not found لم يُعثر على المستضيف %1 Connection refused to host %1 رفض الاتصال بالمستضيف %1 Connection timed out to host %1 انتهت مهلة الاتصال بالمستضيف %1 Unknown error خطأ مجهول Connecting to host failed: %1 فشل الاتصال بالمستضيف: %1 Login failed: %1 فشل الولوج: %1 Listing directory failed: %1 فشلت سرد للدّليل: %1 Changing directory failed: %1 فشل تغيير الدّليل: %1 Downloading file failed: %1 فشلت تنزيل الملفّ: %1 Uploading file failed: %1 فشل رفع الملفّ: %1 Removing file failed: %1 فشلت إزالة الملفّ: %1 Creating directory failed: %1 فشل إنشاء الدّليل: %1 Removing directory failed: %1 فشلت إزالة الدّليل: %1 Not connected غير متصّل Connection refused for data connection رفض اتصال البيانات QHostInfo Unknown error خطأ مجهول QHostInfoAgent Host not found لم يُعثر على المستضيف Unknown address type نوع عنوان مجهول Unknown error خطأ مجهول QHttp Connection refused رفض الاتصال Host %1 not found لم يُعثر على المستضيف %1 Wrong content length طول المحتوى خاطئ HTTPS connection requested but SSL support not compiled in طُلب اتصال HTTPS لكن دعم SSL لم يُبن HTTP request failed فشل طلب الHTTP Host %1 found وُجِد المستضيف %1 Host found وُجِد المستضيف Connected to host %1 اتصل بالمستضيف %1 Connected to host اتصل بالمستضيف Connection to %1 closed أُغلق الاتصال بالمستضيف %1 Connection closed أُغلق الاتصال Unknown error خطأ مجهول Request aborted أُجهض الطّلب No server set to connect to ليس هناك أيّ خادم للوصل Server closed connection unexpectedly أغلق الخادوم الاتصال بصورة غير متوقّعة Invalid HTTP response header ترويسة استجابة HTTP غير صالحة Unknown authentication method طريقة استيثاق مجهولة Invalid HTTP chunked body مقطع HTTP غير صالح Error writing response to device خطأ أثناء كتابة الرد للجهاز Proxy authentication required استيثاق الوسيط مطلوب Authentication required الاستيثاق مطلوب Connection refused (or timed out) رفض الاتصال (أو انتهت المُهلة) Proxy requires authentication الوسيط يتطلب الاستيثاق Host requires authentication المستضيف يتطلب الاستيثاق Data corrupted البيانات تالفة Unknown protocol specified حدد بروتوكول مجهول SSL handshake failed فشلت مصافحة SSL QHttpSocketEngine Did not receive HTTP response from proxy Error parsing authentication request from proxy Authentication required Proxy denied connection Error communicating with HTTP proxy Proxy server not found Proxy connection refused Proxy server connection timed out Proxy connection closed prematurely QIBaseDriver Error opening database Could not start transaction Unable to commit transaction Unable to rollback transaction QIBaseResult Unable to create BLOB Unable to write BLOB Unable to open BLOB Unable to read BLOB Could not find array Could not get array data Could not get query info Could not start transaction Unable to commit transaction Could not allocate statement Could not prepare statement Could not describe input statement Could not describe statement Unable to close statement Unable to execute query Could not fetch next item Could not get statement info QIODevice Permission denied مُنعت الصلاحية Too many open files ملفات كثيرة جدا مفتوحة No such file or directory ليس ثمة ملف أو مجلد No space left on device لم تبق مساحة على الجهاز Unknown error خطأ مجهول QInputContext XIM XIM input method طريقة إدخال XIM Windows input method طريقة إدخال وندوز Mac OS X input method طريقة إدخال ماكنتوش QInputDialog Enter a value: أدخِل قيمة: QLibrary Could not mmap '%1': %2 Plugin verification data mismatch in '%1' Could not unmap '%1': %2 The plugin '%1' uses incompatible Qt library. (%2.%3.%4) [%5] The plugin '%1' uses incompatible Qt library. Expected build key "%2", got "%3" Unknown error خطأ مجهول The shared library was not found. The file '%1' is not a valid Qt plugin. The plugin '%1' uses incompatible Qt library. (Cannot mix debug and release libraries.) Cannot load library %1: %2 Cannot unload library %1: %2 Cannot resolve symbol "%1" in %2: %3 QLineEdit &Undo &تراجع &Redo أ&عِد Cu&t &قص &Copy ا&نسخ &Paste أ&لصِق Select All اختر الكل Delete احذف QLocalServer %1: Name error %1: Permission denied %1: Address in use %1: Unknown error %2 QLocalSocket %1: Connection refused %1: Remote closed %1: Invalid name %1: Socket access error %1: Socket resource error %1: Socket operation timed out %1: Datagram too large %1: Connection error %1: The socket operation is not supported %1: Unknown error %1: Unknown error %2 QMYSQLDriver Unable to open database ' Unable to connect Unable to begin transaction Unable to commit transaction Unable to rollback transaction QMYSQLResult Unable to fetch data Unable to execute query Unable to store result Unable to prepare statement Unable to reset statement Unable to bind value Unable to execute statement Unable to bind outvalues Unable to store statement results Unable to execute next query Unable to store next result QMdiArea (Untitled) (بدون عنوان) QMdiSubWindow %1 - [%2] %1 - [%2] Close أغلق Minimize صغّر Restore Down استعد لأعلى &Restore ا&ستعد &Move ا&نقل &Size ال&حجم Mi&nimize &صغّر Ma&ximize &كبّر Stay on &Top ابق فو&ق الكل &Close أ&غلق - [%1] - [%1] Maximize كبّر Unshade افرد Shade أكمِش Restore استعد Help مساعدة Menu القائمة QMenu Close أغلق Open افتح Execute نفّذ QMenuBar About حول Config تشكيل Preference تفضيل Options خيارات Setting ضبط Setup إعداد Quit إنتهاء Exit خروج QMessageBox OK حسنا About Qt عن Qt Help مساعدة Show Details... أظهر التفاصيل... Hide Details... أخفِ التفاصيل... <h3>About Qt</h3>This program uses Qt version %1.Qt is a C++ toolkit for cross-platform application development.Qt provides single-source portability across MS Windows, Mac OS X, Linux, and all major commercial Unix variants. Qt is also available for embedded devices as Qt for Embedded Linux and Qt for Windows CE.Qt is available under three different licensing options designed to accommodate the needs of our various users.Qt licensed under our commercial license agreement is appropriate for development of proprietary/commercial software where you do not want to share any source code with third parties or otherwise cannot comply with the terms of the GNU LGPL version 2.1 or GNU GPL version 3.0.Qt licensed under the GNU LGPL version 2.1 is appropriate for the development of Qt applications (proprietary or open source) provided you can comply with the terms and conditions of the GNU LGPL version 2.1.Qt licensed under the GNU General Public License version 3.0 is appropriate for the development of Qt applications where you wish to use such applications in combination with software subject to the terms of the GNU GPL version 3.0 or where you are otherwise willing to comply with the terms of the GNU GPL version 3.0.Please see <a href="http://qt.nokia.com/products/licensing">qt.nokia.com/products/licensing</a> for an overview of Qt licensing.Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).Qt is a Nokia product. See <a href="http://qt.nokia.com/">qt.nokia.com</a> for more information. QMultiInputContext Select IM اختر طريقة إدخال QMultiInputContextPlugin Multiple input method switcher مبدّل بين طرق الإدخال Multiple input method switcher that uses the context menu of the text widgets مبدّل بين طرق الإدخال يستخدم قائمة السياق في ودجات النص QNativeSocketEngine The remote host closed the connection Network operation timed out Out of resources Unsupported socket operation Protocol type not supported Invalid socket descriptor Network unreachable Permission denied Connection timed out Connection refused رفض الاتصال The bound address is already in use The address is not available The address is protected Unable to send a message Unable to receive a message Unable to write Network error Another socket is already listening on the same port Unable to initialize non-blocking socket Unable to initialize broadcast socket Attempt to use IPv6 socket on a platform with no IPv6 support Host unreachable Datagram was too large to send Operation on non-socket Unknown error خطأ مجهول The proxy type is invalid for this operation QNetworkAccessCacheBackend Error opening %1 خطأ أثناء فتح %1 QNetworkAccessFileBackend Request for opening non-local file %1 Error opening %1: %2 Write error writing to %1: %2 Cannot open %1: Path is a directory Read error reading from %1: %2 QNetworkAccessFtpBackend No suitable proxy found Cannot open %1: is a directory Logging in to %1 failed: authentication required Error while downloading %1: %2 Error while uploading %1: %2 QNetworkAccessHttpBackend No suitable proxy found QNetworkReply Error downloading %1 - server replied: %2 Protocol "%1" is unknown QNetworkReplyImpl Operation canceled أُلغيت العملية QOCIDriver Unable to logon Unable to initialize QOCIDriver Unable to begin transaction Unable to commit transaction Unable to rollback transaction QOCIResult Unable to bind column for batch execute Unable to execute batch statement Unable to goto next Unable to alloc statement Unable to prepare statement Unable to bind value Unable to execute statement QODBCDriver Unable to connect Unable to connect - Driver doesn't support all needed functionality Unable to disable autocommit Unable to commit transaction Unable to rollback transaction Unable to enable autocommit QODBCResult QODBCResult::reset: Unable to set 'SQL_CURSOR_STATIC' as statement attribute. Please check your ODBC driver configuration Unable to execute statement Unable to fetch next Unable to prepare statement Unable to bind variable Unable to fetch last Unable to fetch Unable to fetch first Unable to fetch previous QObject Home Operation not supported on %1 Invalid URI: %1 Write error writing to %1: %2 Read error reading from %1: %2 Socket error on %1: %2 Remote host closed the connection prematurely on %1 Protocol error: packet of size 0 received No host name given QPPDOptionsModel Name الاسم Value القيمة QPSQLDriver Unable to connect Could not begin transaction Could not commit transaction Could not rollback transaction Unable to subscribe Unable to unsubscribe QPSQLResult Unable to create query Unable to prepare statement QPageSetupWidget Centimeters (cm) سنتيمتر (سم) Millimeters (mm) مليمتر (مم) Inches (in) بوصة Points (pt) نقطة Form نموذج Paper الورقة Page size: مقاس الصفحة: Width: العرض: Height: الارتفاع: Paper source: مصدر الورق: Orientation التموضع Portrait طولي Landscape عرضي Reverse landscape عرضي معكوس Reverse portrait طولي معكوس Margins الهوامش top margin الهامش الأعلى left margin الهامش الأيسر right margin الهامش الأيمن bottom margin الهامش الأسفل QPluginLoader Unknown error خطأ مجهول The plugin was not loaded. لم يُحمَّل المُلحق. QPrintDialog locally connected موصلة محليّا Aliases: %1 بدائل: %1 unknown مجهول OK حسنا Cancel إلغاء Print in color if available طباعة بالألوان إن توفّرت Printer الطّابعة Print all اطبع الكل Print range مدى الطباعة Print last page first طباعة الصّفحة الخيرة أوّلا Number of copies: عدد النّسخ: Paper format مقاييس الورق Portrait صورة Landscape منظر A0 (841 x 1189 mm) A0 ‏(841 × 1189 مم) A1 (594 x 841 mm) A1 ‏(594 × 841 مم) A2 (420 x 594 mm) A2 ‏(420 × 594 مم) A3 (297 x 420 mm) A3 ‏(297 × 420 مم) A5 (148 x 210 mm) A5 ‏(148 × 210 مم) A6 (105 x 148 mm) A6 ‏(105 × 148 مم) A7 (74 x 105 mm) A7 ‏(74 × 105 مم) A8 (52 x 74 mm) A8 ‏(52 × 74 مم) A9 (37 x 52 mm) A9 ‏(37 × 52 مم) B0 (1000 x 1414 mm) B0 ‏(1000 × 1414 مم) B1 (707 x 1000 mm) B1 ‏(707 × 1000 مم) B2 (500 x 707 mm) B2 ‏(500 × 707 مم) B3 (353 x 500 mm) B3 ‏(353 × 500 مم) B4 (250 x 353 mm) B4 ‏(250 × 353 مم) B6 (125 x 176 mm) B6 ‏(125 × 176 مم) B7 (88 x 125 mm) B7‏ (88 × 125 مم) B8 (62 x 88 mm) B4 ‏(62 × 88 مم) B9 (44 x 62 mm) B9 ‏(44 × 62 مم) B10 (31 x 44 mm) B10 ‏(31 × 44 مم) C5E (163 x 229 mm) C5E‏ (163 × 229 مم) DLE (110 x 220 mm) DLE (‏110 × 220 مم) Folio (210 x 330 mm) ملفّ (210 × 330 مم) Ledger (432 x 279 mm) دفتر (432 × 279 مم) Tabloid (279 x 432 mm) جريدة (279 × 432 مم) US Common #10 Envelope (105 x 241 mm) غلاف رسالة أمريكية متداولة رقم 10 (105 × 241 مم) A4 (210 x 297 mm, 8.26 x 11.7 inches) A4‏ (210 × 297 مم، 8.26 × 11.7 بوصة) B5 (176 x 250 mm, 6.93 x 9.84 inches) B5 ‏(176 × 250 مم، 6.93 × 9.84 بوصة) Executive (7.5 x 10 inches, 191 x 254 mm) تنفيذي (7.5 × 10 بوصة، 191 × 254 مم) Legal (8.5 x 14 inches, 216 x 356 mm) قانوني (8.5 × 14 بوصة، 216 × 356 مم) Letter (8.5 x 11 inches, 216 x 279 mm) خطاب (8.5 × 11 بوصة، 216 × 279 مم) Print اطبع File ملفّ Print To File ... اطبع إلى ملف... File %1 is not writable. Please choose a different file name. لا يمكن الكتابة في الملف %1 من فضلك اختر اسم ملف آخر. %1 already exists. Do you want to overwrite it? %1 موجود بالفعل. أتريد استبداله؟ File exists الملف موجود <qt>Do you want to overwrite it?</qt> <qt>أتريد استبداله؟</qt> Print selection اطبع التحديد %1 is a directory. Please choose a different file name. %1 مجلد. من فضلك اختر اسم ملف آخر. A0 A0 A1 A1 A2 A2 A3 A3 A4 A4 A5 A5 A6 A6 A7 A7 A8 A8 A9 A9 B0 B0 B1 B1 B2 B2 B3 B3 B4 B4 B5 B5 B6 B6 B7 B7 B8 B8 B9 B9 B10 B10 C5E C5E DLE DLE Executive تنفيذي Folio ملف Ledger دفتر Legal قانوني Letter خطاب Tabloid جريدة US Common #10 Envelope مظروف أمريكي شائع #10 Custom مخصص &Options >> ال&خيارات >> &Print ا&طبع &Options << الخ&يارا << Print to File (PDF) اطبع إلى ملف (PDF) Print to File (Postscript) اطبع إلى ملف (بوستسكربت) Local file ملف محلي Write %1 file اكتب الملف %1 The 'From' value cannot be greater than the 'To' value. لا يمكن أن تكون قيمة 'من' أكبير من قيمة 'إلى'. QPrintPreviewDialog Page Setup إعداد الصفحة %1% %1% Print Preview معاينة الطباعة Next page الصفحة التالية Previous page الصفحة السابقة First page الصفحة الأولى Last page الصفحة الأخيرة Fit width لائم العرض Fit page لائم الصفحة Zoom in قرّب Zoom out بعّد Portrait طولي Landscape عرضي Show single page اعرض صفحة مفردة Show facing pages اعرض صفحات متقابلة Show overview of all pages اعرض معاينة لكل الصفحات Print اطبع Page setup إعداد الصفحة Close أغلق Export to PDF صدّر إلى PDF Export to PostScript صدّر إلى بوستسكربت QPrintPropertiesDialog Save حفظ OK موافقة QPrintPropertiesWidget Form نموذج Page صفحة Advanced متقدم QPrintSettingsOutput Form نموذج Copies النُسخ Print range مدى الطّباعة Print all اطبع الكل Pages from الصفحات من to إلى Selection التحديد Output Settings إعدادات الخرْج Copies: النُسخ: Collate مرتبة Reverse معكوسة Options الخيارات Color Mode نمط الألون Color ملون Grayscale أبيض وأسود Duplex Printing الطباعة المزدوجة None لا Long side الجانب الطويل Short side الجانب القصير QPrintWidget Form نموذج Printer الطّابعة &Name: الا&سم: P&roperties ال&خصائص Location: المكان: Preview معاينة Type: النوع: Output &file: ملف ال&ناتج: ... ... QProcess Could not open input redirection for reading Could not open output redirection for writing Resource error (fork failure): %1 Process operation timed out Error reading from process Error writing to process Process crashed No program defined Process failed to start QProgressDialog Cancel ألغِ QPushButton Open افتح QRadioButton Check أشّر QRegExp no error occurred لم يحدث أيّ خطأ disabled feature used استُعملت خاصية مُعطّلة bad char class syntax صيغة صنف محرف سيئة bad lookahead syntax صيغة سياق أمامي سيئة bad repetition syntax صيغة تكرار سيئة invalid octal value قيمة ثمانية غير صالحة missing left delim الحد الأيسر ناقص unexpected end نهاية غير متوقّعة met internal limit وصل إلى الحد الداخلي QSQLite2Driver Error to open database خطأ أثناء فتح قاعدة البيانات Unable to begin transaction Unable to commit transaction Unable to rollback Transaction QSQLite2Result Unable to fetch results تعذّر جلب النتائج Unable to execute statement تعذّر تنفيذ الجملة QSQLiteDriver Error opening database Error closing database Unable to begin transaction Unable to commit transaction Unable to rollback transaction QSQLiteResult Unable to fetch row Unable to execute statement Unable to reset statement Unable to bind parameters Parameter count mismatch No query QScrollBar Scroll here Left edge Top Right edge Bottom Page left Page up Page right Page down Scroll left Scroll up Scroll right Scroll down Line up تصفيف Position Line down QSharedMemory %1: unable to set key on lock %1: create size is less then 0 %1: unable to lock %1: unable to unlock %1: permission denied %1: already exists %1: doesn't exists %1: out of resources %1: unknown error %2 %1: key is empty %1: unix key file doesn't exists %1: ftok failed %1: unable to make key %1: system-imposed size restrictions %1: not attached %1: invalid size %1: key error %1: size query failed QShortcut Space Space Esc Esc Tab Tab Backtab Backtab Backspace Backspace Return Return Enter Enter Ins Ins Del Del Pause Pause Print Print SysReq SysReq Home Home End End Left Left Up Up Right Right Down Down PgUp PgUp PgDown PgDown CapsLock CapsLock NumLock NumLock ScrollLock ScrollLock Menu Menu Help Help Back Back Forward Forward Stop Stop Refresh Refresh Volume Down Volume Down Volume Mute Volume Mute Volume Up Volume Up Bass Boost Bass Boost Bass Up Bass Up Bass Down Bass Down Treble Up Treble Up Treble Down Treble Down Media Play Media Play Media Stop Media Stop Media Previous Media Previous Media Next Media Next Media Record Media Record Favorites Favorites Search Search Standby Standby Open URL Open URL Launch Mail Launch Mail Launch Media Launch Media Launch (0) Launch (0) Launch (1) Launch (1) Launch (2) Launch (2) Launch (3) Launch (3) Launch (4) Launch (4) Launch (5) Launch (5) Launch (6) Launch (6) Launch (7) Launch (7) Launch (8) Launch (8) Launch (9) Launch (9) Launch (A) Launch (A) Launch (B) Launch (B) Launch (C) Launch (C) Launch (D) Launch (D) Launch (E) Launch (E) Launch (F) Launch (F) Print Screen Print Screen Page Up Page Up Page Down Page Down Caps Lock Caps Lock Num Lock Num Lock Number Lock Number Lock Scroll Lock Scroll Lock Insert Insert Delete Delete Escape Escape System Request System Request Select Select Yes نعم No لا Context1 Context1 Context2 Context2 Context3 Context3 Context4 Context4 Call Call Hangup Hangup Flip Flip Ctrl Ctrl Shift Shift Alt Alt Meta Meta + + F%1 F%1 Home Page Home Page QSlider Page left صفحة لليسار Page up صفحة لأعلى Position الموضع Page right صفحة لليمين Page down صفحة لأسفل QSocks5SocketEngine Connection to proxy refused Connection to proxy closed prematurely Proxy host not found Connection to proxy timed out Proxy authentication failed Proxy authentication failed: %1 SOCKS version 5 protocol error General SOCKSv5 server failure Connection not allowed by SOCKSv5 server TTL expired SOCKSv5 command not supported Address type not supported Unknown SOCKSv5 proxy error code 0x%1 Network operation timed out QSpinBox More أكثر Less أقل QSql Delete احذف Delete this record? أأحذف هذاالتّسجيل؟ Yes نعم No لا Insert أدرِج Update حدّث Save edits? أأحفظ التّغييرات؟ Cancel ألغِ Confirm أكّد Cancel your edits? أألغي التّغييرات؟ QSslSocket Unable to write data: %1 Error while reading: %1 Error during SSL handshake: %1 Error creating SSL context (%1) Invalid or empty cipher list (%1) Error creating SSL session, %1 Error creating SSL session: %1 Cannot provide a certificate with no key, %1 Error loading local certificate, %1 Error loading private key, %1 Private key does not certificate public key, %1 QSystemSemaphore %1: out of resources %1: permission denied %1: already exists %1: does not exist %1: unknown error %2 QTDSDriver Unable to open connection تعذّر بدء الاتصال Unable to use database تعذّر استخدام قاعدة البيانات QTabBar Scroll Left لف لليسار Scroll Right لف لليمين QTcpServer Operation on socket is not supported العملية على المقبس غير مدعومة QTextControl &Undo &تراجع &Redo أ&عِد Cu&t &قص &Copy ا&نسخ Copy &Link Location انسخ &مكان الوصلة &Paste ا&لصق Delete احذف Select All اخترالكل QToolButton Press اضغط Open افتح QUdpSocket This platform does not support IPv6 لا تدعم هذه المنصة IPv6 QUndoGroup Undo تراجع Redo أعِد QUndoModel <empty> <فارغ> QUndoStack Undo تراجع Redo أعِد QUnicodeControlCharacterMenu LRM Left-to-right mark علامة يسار إلى يمين (LRM) RLM Right-to-left mark علامة يمين إلى يسار (RLM) ZWJ Zero width joiner واصل صفري العرض (ZWJ) ZWNJ Zero width non-joiner فاصل صفري العرض (ZWNJ) ZWSP Zero width space مسافة صفرية العرض (ZWSP) LRE Start of left-to-right embedding غرس يسار إلى يمين (LRE) RLE Start of right-to-left embedding غرس يين إلى يسار (RLE) LRO Start of left-to-right override تخطي يسار إلى يمين (LRO) RLO Start of right-to-left override تخطي يمين إلى يسار (RLO) PDF Pop directional formatting أزل تنسيق الاتجاه (PDF) Insert Unicode control character أدرِج محرف تحكم يونيكود QWebFrame Request cancelled أُلغي الطلب Request blocked حُظِر الطلب Cannot show URL تعذّر عرض المسار Frame load interruped by policy change قُوطع تحميل الإطار بسبب تغير في السياسة Cannot show mimetype تعذّر عرض نوع mime File does not exist الملف غير موجود QWebPage Bad HTTP request طلب HTTP سيء Submit default label for Submit buttons in forms on web pages أرسِل Submit Submit (input element) alt text for <input> elements with no alt, title, or value أرسِل Reset default label for Reset buttons in forms on web pages صفّر This is a searchable index. Enter search keywords: text that appears at the start of nearly-obsolete web pages in the form of a 'searchable index' هذا فهرس يمكن البحث بح. أدخل عبارات البحث: Choose File title for file button used in HTML forms اختر ملفا No file selected text to display in file button used in HTML forms when no file is selected لم تختر أي ملفات Open in New Window Open in New Window context menu item افتح في نافذة جديدة Save Link... Download Linked File context menu item احفظ الوصلة... Copy Link Copy Link context menu item انسخ الوصلة Open Image Open Image in New Window context menu item افتح الصورة Save Image Download Image context menu item احفظ الصورة Copy Image Copy Link context menu item انسخ الصورة Open Frame Open Frame in New Window context menu item افتح الإطار Copy Copy context menu item انسخ Go Back Back context menu item عد للخلف Go Forward Forward context menu item اذهب للأمام Stop Stop context menu item قف Reload Reload context menu item أعِد التحميل Cut Cut context menu item قص Paste Paste context menu item الصق No Guesses Found No Guesses Found context menu item لا اقتراحات Ignore Ignore Spelling context menu item تجاهل Add To Dictionary Learn Spelling context menu item أضف إلى القاموس Search The Web Search The Web context menu item ابحث في الوب Look Up In Dictionary Look Up in Dictionary context menu item ابحث في القاموس Open Link Open Link context menu item افتح الوصلة Ignore Ignore Grammar context menu item تجاهل Spelling Spelling and Grammar context sub-menu item الإملاء Show Spelling and Grammar menu item title أظهر الإملاء والنحو Hide Spelling and Grammar menu item title أخفِ الإملاء والنحو Check Spelling Check spelling context menu item دقق الإملاء Check Spelling While Typing Check spelling while typing context menu item دقق الإملاء أثناء الكتابة Check Grammar With Spelling Check grammar with spelling context menu item دقق النحو أثناء الكتابة Fonts Font context sub-menu item الخطوط Bold Bold context menu item عريض Italic Italic context menu item مائل Underline Underline context menu item مسطّر Outline Outline context menu item محدد Direction Writing direction context sub-menu item الاتجاه Text Direction Text direction context sub-menu item اتجاه النص Default Default writing direction context menu item المبدئي LTR Left to Right context menu item من اليسار لليمين RTL Right to Left context menu item من اليمين لليسار Inspect Inspect Element context menu item افحص No recent searches Label for only item in menu that appears when clicking on the search field image, when no searches have been performed لا بحوث حديثة Recent searches label for first item in the menu that appears when clicking on the search field image, used as embedded menu title البحوث الحديثة Clear recent searches menu item in Recent Searches menu that empties menu's contents امسح البحوث الحديثة Unknown Unknown filesize FTP directory listing item غير معروف %1 (%2x%3 pixels) Title string for images %1 (%2×%3 بكسل) Web Inspector - %2 فاحِص الوب - %2 Scroll here لف هنا Left edge الحافة اليسرى Top فوق Right edge الحافة اليمنى Bottom تحت Page left صفحة لليسار Page up صفحة لأعلى Page right صفحة لليمين Page down صفحة لأسفل Scroll left لف لليسار Scroll up لف لأعلى Scroll right لف لليمين Scroll down لف لأسفل %n file(s) number of chosen file لا ملفات ملف واحد ملفين %n ملفات %n ملفا %n ملف JavaScript Alert - %1 تنبيه جافا سكربت - %1 JavaScript Confirm - %1 تأكيد جافا سكربت - %1 JavaScript Prompt - %1 محث جافا سكربت - %1 Move the cursor to the next character انقل المؤشر للحرف التالي Move the cursor to the previous character انقل المؤشر للحرف السابق Move the cursor to the next word انقل المؤشر للكلمة التالية Move the cursor to the previous word انقل المؤشر للكلمة السابقة Move the cursor to the next line انقل المؤشر للسطر التالي Move the cursor to the previous line انقل المؤشر للسطر السابق Move the cursor to the start of the line انقل المؤشر لبداية السطر Move the cursor to the end of the line انقل المؤشر لنهاية السطر Move the cursor to the start of the block انقل المؤشر لبداية المربع Move the cursor to the end of the block انقل المؤشر لنهاية المربع Move the cursor to the start of the document انقل المؤشر لبداية المستند Move the cursor to the end of the document انقل المؤشر لنهاية المستند Select all اختر الكل Select to the next character اختر الحرف التالي Select to the previous character اختر الحرف السابق Select to the next word اختر الكلمة التالية Select to the previous word اختر الكلمة السابقة Select to the next line اختر السطر التالي Select to the previous line اختر السطر السابق Select to the start of the line اختر حتى بداية السطر Select to the end of the line اختر حتى نهاية السطر Select to the start of the block اختر حتى بداية المربع Select to the end of the block اختر حتى نهاية المربع Select to the start of the document اختر حتى بداية المستند Select to the end of the document اختر حتى نهاية المستند Delete to the start of the word احذف حتى بداية الكلمة Delete to the end of the word احذف حتى نهاية الكلمة Insert a new paragraph أدرِج فقرة جديدة Insert a new line أدرِج سطرا جديدا QWhatsThisAction What's This? ما هذا؟ QWidget * * QWizard < &Back < لل&خلف &Finish أ&نهِ &Help &مساعدة Go Back اذهب للخلف Continue واصِل Commit أرسِل Done تم Quit إنتهاء Help مساعدة Cancel ألغِ &Next ال&تالي &Next > ال&تّالي > QWorkspace &Restore ا&ستعِد &Move ا&نقل &Size ال&حجم Mi&nimize &صغّر Ma&ximize &كبّر &Close أ&غلق Stay on &Top اب&ق فوق الكل Sh&ade اكم&ش %1 - [%2] %1 - [%2] Minimize صغّر Restore Down استعد لأسفل Close أغلق &Unshade ا&فرد QXml no error occurred لم يحدث أيّ خطأ error triggered by consumer أطلق الخطأ من طرف المستهلك unexpected end of file نهاية غير متوقّعة للملفّ more than one document type definition أكثر من تعريف لطراز الوثيقة error occurred while parsing element حدث خطأ عند تحليل تركيب العنصر tag mismatch عدم تطابق الوسم error occurred while parsing content حدث خطأ عند تحليل تركيب المحتوى unexpected character محرف غير متوقّع invalid name for processing instruction اسم غير صالح لتعليمة المعالجة version expected while reading the XML declaration الإصدار متوقّع عند قراءة إعلان الXML wrong value for standalone declaration قيمة خاطئة لإعلان مستقلّ encoding declaration or standalone declaration expected while reading the XML declaration إعلان التّرميز أو إعلان مستقلّ متوقّع عند قراءة إعلان الXML standalone declaration expected while reading the XML declaration إعلان مستقلّ متوقّع عند قراءة إعلان الXML error occurred while parsing document type definition حدث خطأ عند تحليل تركيب تعريف طراز الوثيقة letter is expected حرف متوقّع error occurred while parsing comment حدث خطأ عند تحليل تركيب التّعليق error occurred while parsing reference حدث خطأ عند تحليل تركيب المرجع internal general entity reference not allowed in DTD المرجع إلى كيان داخلي عامّ غير مسموح به في الDTD external parsed general entity reference not allowed in attribute value المرجع إلى كيان خارجي عامّ معرب غير مسموح به في قيمة الخاصّية external parsed general entity reference not allowed in DTD المرجع إلى كيان خارجي عامّ معرب غير مسموح به في الDTD unparsed entity reference in wrong context مرجع إلى كيان غير معرب في سياق خاطئ recursive entities كيانات معاودة error in the text declaration of an external entity خطأ في التّعريف النّصّي لكيان خارجي QXmlStream Extra content at end of document. Invalid entity value. Invalid XML character. Sequence ']]>' not allowed in content. Namespace prefix '%1' not declared Attribute redefined. Unexpected character '%1' in public id literal. Invalid XML version string. Unsupported XML version. %1 is an invalid encoding name. Encoding %1 is unsupported Standalone accepts only yes or no. Invalid attribute in XML declaration. Premature end of document. Invalid document. Expected , but got ' Unexpected ' Expected character data. Recursive entity detected. Start tag expected. XML declaration not at start of document. NDATA in parameter entity declaration. %1 is an invalid processing instruction name. Invalid processing instruction name. Illegal namespace declaration. Invalid XML name. Opening and ending tag mismatch. Reference to unparsed entity '%1'. Entity '%1' not declared. Reference to external entity '%1' in attribute value. Invalid character reference. Encountered incorrectly encoded content. The standalone pseudo attribute must appear after the encoding. %1 is an invalid PUBLIC identifier. QtXmlPatterns An %1-attribute with value %2 has already been declared. An %1-attribute must have a valid %2 as value, which %3 isn't. Network timeout. Element %1 can't be serialized because it appears outside the document element. Attribute %1 can't be serialized because it appears at the top level. Year %1 is invalid because it begins with %2. Day %1 is outside the range %2..%3. Month %1 is outside the range %2..%3. Overflow: Can't represent date %1. Day %1 is invalid for month %2. Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; Time %1:%2:%3.%4 is invalid. Overflow: Date can't be represented. At least one component must be present. At least one time component must appear after the %1-delimiter. No operand in an integer division, %1, can be %2. The first operand in an integer division, %1, cannot be infinity (%2). The second operand in a division, %1, cannot be zero (%2). %1 is not a valid value of type %2. When casting to %1 from %2, the source value cannot be %3. Integer division (%1) by zero (%2) is undefined. Division (%1) by zero (%2) is undefined. Modulus division (%1) by zero (%2) is undefined. Dividing a value of type %1 by %2 (not-a-number) is not allowed. Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed. Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed. A value of type %1 cannot have an Effective Boolean Value. Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values. Value %1 of type %2 exceeds maximum (%3). Value %1 of type %2 is below minimum (%3). A value of type %1 must contain an even number of digits. The value %2 does not. %1 is not valid as a value of type %2. Operator %1 cannot be used on type %2. Operator %1 cannot be used on atomic values of type %2 and %3. The namespace URI in the name for a computed attribute cannot be %1. The name for a computed attribute cannot have the namespace URI %1 with the local name %2. Type error in cast, expected %1, received %2. When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed. No casting is possible with %1 as the target type. It is not possible to cast from %1 to %2. Casting to %1 is not possible because it is an abstract type, and can therefore never be instantiated. It's not possible to cast the value %1 of type %2 to %3 Failure when casting from %1 to %2: %3 A comment cannot contain %1 A comment cannot end with a %1. No comparisons can be done involving the type %1. Operator %1 is not available between atomic values of type %2 and %3. An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place. A library module cannot be evaluated directly. It must be imported from a main module. No template by name %1 exists. A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type. A positional predicate must evaluate to a single numeric value. The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, is %2 invalid. %1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3. The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two. The data of a processing instruction cannot contain the string %1 No namespace binding exists for the prefix %1 No namespace binding exists for the prefix %1 in %2 %1 is an invalid %2 %1 takes at most %n argument(s). %2 is therefore invalid. %1 requires at least %n argument(s). %2 is therefore invalid. The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration. The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. %1 is not a valid XML 1.0 character. The first argument to %1 cannot be of type %2. If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same. %1 was called. %1 must be followed by %2 or %3, not at the end of the replacement string. In the replacement string, %1 must be followed by at least one digit when not escaped. In the replacement string, %1 can only be used to escape itself or %2, not %3 %1 matches newline characters %1 and %2 match the start and end of a line. Matches are case insensitive Whitespace characters are removed, except when they appear in character classes %1 is an invalid regular expression pattern: %2 %1 is an invalid flag for regular expressions. Valid flags are: If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified. It will not be possible to retrieve %1. The root node of the second argument to function %1 must be a document node. %2 is not a document node. The default collection is undefined %1 cannot be retrieved The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization). A zone offset must be in the range %1..%2 inclusive. %3 is out of range. %1 is not a whole number of minutes. Required cardinality is %1; got cardinality %2. The item %1 did not match the required type %2. %1 is an unknown schema type. Only one %1 declaration can occur in the query prolog. The initialization of variable %1 depends on itself No variable by name %1 exists The variable %1 is unused Version %1 is not supported. The supported XQuery version is 1.0. The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2. No function with signature %1 is available A default namespace declaration must occur before function, variable, and option declarations. Namespace declarations must occur before function, variable, and option declarations. Module imports must occur before function, variable, and option declarations. It is not possible to redeclare prefix %1. Prefix %1 is already declared in the prolog. The name of an option must have a prefix. There is no default namespace for options. The Schema Import feature is not supported, and therefore %1 declarations cannot occur. The target namespace of a %1 cannot be empty. The module import feature is not supported No value is available for the external variable by name %1. A construct was encountered which only is allowed in XQuery. A template by name %1 has already been declared. The keyword %1 cannot occur with any other mode name. The value of attribute %1 must of type %2, which %3 isn't. The prefix %1 can not be bound. By default, it is already bound to the namespace %2. A variable by name %1 has already been declared. A stylesheet function must have a prefixed name. The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this) The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases. The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2 A function already exists with the signature %1. No external functions are supported. All supported functions can be used directly, without first declaring them as external An argument by name %1 has already been declared. Every argument name must be unique. When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal. In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching. In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching. In an XSL-T pattern, function %1 cannot have a third argument. In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching. In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can. %1 is an invalid template mode name. The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide. The Schema Validation Feature is not supported. Hence, %1-expressions may not be used. None of the pragma expressions are supported. Therefore, a fallback expression must be present Each name of a template parameter must be unique; %1 is duplicated. The %1-axis is unsupported in XQuery %1 is not a valid name for a processing-instruction. %1 is not a valid numeric literal. No function by name %1 is available. The namespace URI cannot be the empty string when binding to a prefix, %1. %1 is an invalid namespace URI. It is not possible to bind to the prefix %1 Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared). Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared). Two namespace declaration attributes have the same name: %1. The namespace URI must be a constant and cannot use enclosed expressions. An attribute by name %1 has already appeared on this element. A direct element constructor is not well-formed. %1 is ended with %2. The name %1 does not refer to any schema type. %1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works. %1 is not an atomic type. Casting is only possible to atomic types. %1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported. The name of an extension expression must be in a namespace. empty zero or one exactly one one or more zero or more Required type is %1, but %2 was found. Promoting %1 to %2 may cause loss of precision. The focus is undefined. It's not possible to add attributes after any other kind of node. An attribute by name %1 has already been created. Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported. %1 is an unsupported encoding. %1 contains octets which are disallowed in the requested encoding %2. The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character. Ambiguous rule match. In a namespace constructor, the value for a namespace cannot be an empty string. The prefix must be a valid %1, which %2 is not. The prefix %1 cannot be bound. Only the prefix %1 can be bound to %2 and vice versa. Circularity detected The parameter %1 is required, but no corresponding %2 is supplied. The parameter %1 is passed, but no corresponding %2 exists. The URI cannot have a fragment Element %1 is not allowed at this location. Text nodes are not allowed at this location. Parse error: %1 The value of the XSL-T version attribute must be a value of type %1, which %2 isn't. Running an XSL-T 1.0 stylesheet with a 2.0 processor. Unknown XSL-T attribute %1. Attribute %1 and %2 are mutually exclusive. In a simplified stylesheet module, attribute %1 must be present. If element %1 has no attribute %2, it cannot have attribute %3 or %4. Element %1 must have at least one of the attributes %2 or %3. At least one mode must be specified in the %1-attribute on element %2. Attribute %1 cannot appear on the element %2. Only the standard attributes can appear. Attribute %1 cannot appear on the element %2. Only %3 is allowed, and the standard attributes. Attribute %1 cannot appear on the element %2. Allowed is %3, %4, and the standard attributes. Attribute %1 cannot appear on the element %2. Allowed is %3, and the standard attributes. XSL-T attributes on XSL-T elements must be in the null namespace, not in the XSL-T namespace which %1 is. The attribute %1 must appear on element %2. The element with local name %1 does not exist in XSL-T. Element %1 must come last. At least one %1-element must occur before %2. Only one %1-element can appear. At least one %1-element must occur inside %2. When attribute %1 is present on %2, a sequence constructor cannot be used. Element %1 must have either a %2-attribute or a sequence constructor. When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor. Element %1 cannot have children. Element %1 cannot have a sequence constructor. The attribute %1 cannot appear on %2, when it is a child of %3. A parameter in a function cannot be declared to be a tunnel. This processor is not Schema-aware and therefore %1 cannot be used. Top level stylesheet elements must be in a non-null namespace, which %1 isn't. The value for attribute %1 on element %2 must either be %3 or %4, not %5. Attribute %1 cannot have the value %2. The attribute %1 can only appear on the first %2 element. At least one %1 element must appear as child of %2. VolumeSlider Muted مُصمت Volume: %1% الشدة: %1%